Sunday 23 January 2011

Almost complete...

Johns guitar is now ready for filling and polishing and these few pictures show the guitar as it was on the bench at the end of last week. I always enjoy fretting and since I have acquired this soft faced hammer I am even happier. The picture above shows the last few frets being installed. The metal block in the picture is held under the fingerboard whilst the upper frets are being tapped in and helps to prevent the soundboard splitting. Regular followers of this site will know that Johns guitar has featured more than any other guitar I am making at the moment. This is due to the fact that John is on the other side of the globe and so must share in the making of his guitar by digital means!

Here is an earlier picture of the fingerboard being glued and clamped, and below is the fingerboard prior to clamping. The masking tape on the soundboard keeps the excess glue in check. The next post will show the completed guitar awaiting polish...

No comments:

Post a Comment